Joyetech Ultex T80 with NCFilm heating Review

The Joyetech Ultex T80 is a tubular vape mod with a cool futuristic design and packed full of interesting features that we usually see on box mods. But what really sets it apart from all the other similar vape kits on the market – of which there are many – is the Cubis Max tank. It’s got top airflow to minimize leaking, holds up to 5ml of e-liquid, and most importantly, it does away with coil-heads, relying instead on an innovative heating element that can allegedly be cleaned and re-used for months.

A Look at the Contents

The joytech Ultex T80 kit comes in a large rectangular cardboard box with the assembled tubular mod and sub-ohm tank on the front, and a list of contents, company information and a scratch and check authenticity seal on the back.

Joyetech Ultex T80

Inside the box, we have the single 18650 battery tube mod sitting next to the Cubis Max tank, a spare glass section and a smaller box that contains the micro-USB charging cable and two small bags of accessories (cotton sheets, spare o-rings for the tank, a spare NFC heating element, and a small screwdriver). At the bottom of the box you’ll find separate user manuals for the mod and the tank as well as a battery warning card.

Design and Build Quality

Yeah, i have to say the Joyetech Ultex T80 looks very different compared to the vast majority of regulated tubular mods. Instead of a simple tube with an unimpressive tank slapped on top, you have this intricately designed piece of metal that, in my opinion, resembles the handle of a lightsaber, and a futuristic-looking tank. It’s really quite impressive for appears to be a rudimentary vape mod. But appearances can be deceiving, as there is much more to the T80 that meets the eye.

Joyetech Ultex T80

The mod is made of zinc alloy and has a comfortable weight to it with a battery inserted, and the tank is made of stainless steel and glass.

From the bottom of the battery tube to the Delrin drip, the Joyetech Ultex T80 measures 138.5mm and has a diameter of 28mm. But that’s around its widest point, so don’t assume that you can get away with a 28mm atomizer without any overhang. The Cubis Max tank is also 28mm around its glass section, but it’s actually only 26mm at the base in order to align perfectly with the tank. So any tank or RDA with a base larger than 26mm will overhang.

It’s hard for me to describe the general look of this mod, but I think the word futuristic pretty much sums it up. So if you’re into SciFi, alien artefacts, and stuff like that, I think you’ll find it very attractive. I personally like the overall design and I think Joyetech deserves a thumbs up for trying something different.

Joyetech Ultex T80

Starting at the top, the Joyetech Ultex T80 mod features a classic 510 connection with a gold-plated, spring-loaded 510 pin. The fire button is located close the top of the mod, opposite the micro-USB charging cable. Instead of the classic round fire button, Joyetech decided to go with an elongated rectangular design that fits the general design of the mod very well. The button protrudes from the mod quite a bit, is very clicky and doesn’t have any rattle.

The ‘+’ and ‘-‘ buttons are located between the fire button and the small display near the bottom. They are not marked but it doesn’t take a genius to figure out which is which, since they are positioned one above the other. Unlike the fire button, which doesn’t rattle at all, these adjustment buttons are very loose and do rattle if you shake the mod. However, I didn’t find them annoying at all during day to day use.

Joyetech Ultex T80

The Joyetech Ultex T80 is one of the few modern tube mods that features an integrated display. It reminds me of the early regulated tube mods, like the Provari 2.5. It’s a small, black and white screen with an unimpressive resolution compared to the gorgeous screens we’ve seen on box mods like the Modefined Draco or Smoant Naboo, but it’s a nice feature nonetheless.

Finally, at the bottom of the mod, we have the battery cap, which unscrews to reveal the single 18650 battery compartment. The bay itself is a bit tight. Batteries with original wrapping fit snug, but rewrapped batteries tend to get stuck inside because there’s no wiggle room at all. That’s a pro and a con, depending on how you look at it.

Joyetech Ultex T80

Menu System and Navigation

Most of the regulated tubular mods I’ve reviewed lately, like the SMOK Stick Prince or the Eleaf iJust 3 didn’t even have a menu. They ere rudimentary vaping devices that pulled power straight from the battery, so all you had to to was screw on an atomizer and push the fire button. Well, the Ultex T80 is different. Not only does it have variable wattage technology, but it also has most of the features we see on advanced mods, like temperature control, TCR and preheat settings. To be honest, I really didn’t expect it to be this complex.

To get into the modes menu, all you have to do is press the fire button three times. You will then be able to browse through all the available modes – wattage mode, temperature mode for three supported materials (stainless steel, titanium and nickel), three TCR memory modes and even Bypass, which lets you pull power straight from the battery, but with all the built-in protections still active.

Joyetech Ultex T80

But the Ultex T80 actually has a secondary menu you can access. Hold the fire button and the ‘+’ button pressed simultaneously for two seconds, and you will be taken to the settings menu, where you can, select which secondary parameter appears on the main screen (voltage, amperage or puffs) enable and disable Stealth mode (turn off the display), select the duration and intensity of the preheat, check the version of the firmware and, finally, check the voltage of the battery.

Apart from custom curves mode, and other bells and whistles that you don’t really need, this thing has all the main features you’ll find on the latest advanced mods, which is pretty darn impressive.

Joyetech Ultex T80

Navigation is pretty straightforward, as all you have to know is that the ‘+’ and ‘-‘ buttons are used to browse through various submenus and options, and pressing the fire button confirms your choices.

The Tank

While the Joyetech Ultex T80 is pretty cool for a regulated tube mod, it pales in comparison to the Cubis Max tank, which is a bit unusual, as in most other similar kits, you get a run of the mill tank that works ok but doesn’t really blow you away. But as I said before, this kit is different.

Like the original Joyetech Cubis tank, the Cubis Max features top airflow to minimize leaking. It has an e-liquid capacity of up to 5ml, and can be refilled through the top fill port, by sliding the top cap outwards. Just look for the red arrow on the top cap and push against it with your thumb to reveal the fill slot.

Joyetech Ultex T80

The airflow channel on this tank is very interesting. basically that chimney going through the middle of the tank has air and vapor going in opposite directions. There is an outer channel through which the air travels from the top airflow slots down to the heating element at the bottom and then goes into the inner channel and reaches the user’s mouth. The design is similar to the OBS Engine RTA, only here you can actually see both channels when you disassemble the tank.

But what really sets the Cubis Max apart from any of the tanks I’ve ever used is the fact that it doesn’t need coil-heads. Instead it uses a replaceable heating element called NCFilm heater, which I am pretty sure stands for “Notch Coil Film”, as this heater looks very similar to Joyetech’s innovative notch coil.

Joyetech Ultex T80

So how does this NCFilm work? Well, it’s actually quite an interesting design. The heater is screwed to the inside of the tank and on the tank base you have a square sheet of cotton pressed against it. When the battery is activated, the NCFilm element, which is made of Kanthal, heats up and vaporizes the e-liquid absorbed by the piece of cotton. The juice flows into this unconventional wicking through two slots located on either side of the heating elements, so you never have to worry about the cotton drying up as long as there’s e-liquid left in the tank. Thank you, gravity!

The Cubis Max is designed in such a way that you can check the cotton wicking and even replace it without having to drain the tank, which is a big plus. All you have to do is unscrew the outer ring around the base of the tank, hold the atomizer upside down and then grab the connection pin and pull the base off. Then you can adjust or replace the sheet of cotton, put the base back on and keep on vaping.

Joyetech Ultex T80

The biggest advantage of this innovative NCFilm is that you can actually clean it and reuse it for several months. That doesn’t work with most coil-heads. Once gunk builds up around the heating element and on the wicking, all you can do is throw it away, but with this heating element, you can just dry burn the juice deposits, change the wicking and you’re good to go. Joyetech claims that you can use an NCFilm for up to three months before replacing it, but I guess you can use it even longer than that if you’re vaping a clear, unsweetened e-juice.

And since the Ultex T80 kit includes a spare NCFilm heater, you’re good to go for at least six months, which is a huge pro in terms of maintenance consts. To replace, just use the included screwdriver to take out the two tiny screws keeping the heating elements in place, put the new one back on, and you’re good to go.

Joyetech Ultex T80

Battery Life and Performance

As I mentioned, the Joyetech Ultex T80 is powered by a single 18650 battery (not included). Battery life depends on a variety of factors, like the capacity of your battery, the set power output and how much you’re using the device. If you’re going to crank up the power to maximum (80W), that battery won’t last you more than a couple of hours, maybe three, but at a reasonable power level (40W – 50W), you’re probably going to get around 6 hours of battery life. That’s been my average range anyway.

The Ultex T80 features on-board charging, fast charging and vape-while-charging. The battery charging rate stated on the Joyetech website is 2A, and you will be able to use the device while it’s charging. That’s pretty good, but if you own an external battery charging, I recommend you use that instead whenever possible. It’s safer, and it’s better for the battery.

Joyetech Ultex T80

In terms of performance, I haven’t had any issues with the mod whatsoever. I don’t know what chip Joyetech has used this time around, but this device fires extremely fast, and so far I have yet to encounter any errors. It works as intended is what I’m trying to say.

The tank is about the same, although there are a few things I would like to point out. The NCFilm may have the huge upside that it can be used for a long time and thus save you money, but it also tends to shoot droplets of hot e-liquid into your mind every once in a while. It’s not nearly as bad as the original Cubis and it’s BF coil-heads, but it does happen occasionally so I have to mention it. However, the droplets rarely make it all the way to your mouth, and they’re really small so you barely feel them.

Joyetech Ultex T80

Another thing I have to mention is the mediocre flavor. It’s not bad, but it’s definitely not the best I’ve ever gotten out of a tank either. As far as I can tell, it has nothing to do with the wicking not being completely saturated – Joyetech’s system actually guarantees perfect saturation – but rather with the way the airflow is designed. You see, the air coming through the outer chamber of the chimney only hits the top of the NCFilm heater and then goes straight through the inner chamber, and that’s not ideal in my book. The airflow doesn’t even hit the heating element directly, not to mention coming in from underneath it to push all the flavorful vapor into the chimney, but rather travels above it before shooting back up.

Overall, the NCFilm heater is a very interesting innovation, I just think it needs a bit of work to perfect. I for one can’t wait to see what Joyetech does with it going forward, because the premise of a reusable coil for casual users is definitely going to appeal to a lot of people.

Joyetech Ultex T80


The Joyetech Ultex T80 surprised the heck out of me. The mod itself is way more advanced than I expected, featuring most of the modes and settings we usually see on high-end box mods, and the NCFilm really made the Cubis Max tank the star of this kit. The fact that you can clean it and use it for months is a potential game changer, and the performance was promising as well.

Whether you’re looking for a tubular mod that’s packed full of features or just want to see what the new NCFilm heating element is all about, I recommend giving the Ultex T80 a try, it’ll surprise you.


  • Build Quality   ★★★☆☆
  • Performance ★★★☆☆
  • Ease of Use ★★★☆☆
  • Pricing ★★★☆☆

Product Detail: Joyetech ULTEX T80 80W TC Kit with Cubis Max Atomizer

Recommended product:
Tesla Punk 86w Mech Mod
iJoy Shogun Univ Mod
Smoant Karat Pod kit
Coilart mage mech V2.0
Nikola Wolverine 230w Box Mod

More Article:
Freemax Twister Kit Preview – With Fireluke 2 Multi Mesh Tank!
Ijoy Dimond VPC Kit Review | I think it’s around here somewhere?
Hotcig G100. First look

Lost Vape Mirage DNA75C Mod Review

Lost Vape has been delivering some of the very best mods integrating the Evolv DNA chip for some time, and the Mirage looks like another exceptionally designed box.

The Lost Vape Mirage DNA75C Mod is a box mod designed to be compatible with a single high drain 18650, 20700 and 21700 (converter included) battery and can fire up to 100W Max using the latter two. Its manufactured with rounded ends with a colourful resin finish at the rear and also rumors of a wood body material replacing the resin soon.

The Mirage features the Evolv DNA75 Color chip inside which incorporates a power regulated digital switch-mode and Evolv’s patented Wattage Control, Temperature Protection, Preheat, a full-color TFT screen, Reverse Polarity Protection, an onboard programmable multicolor LED, waterproof buttons and a real-time clock.

Specs & Features


Evolv DNA75C Board with upgradable firmware
Theme Designer Software/Customizable User Interface
Onboard Programmable Multicolor LED
Stainless Steel 510 Atomizer Connector
Anodized Aluminum Frame and Top
Boost/Preheat 100 Watts Power
Integrated 1Amp On-board Balanced Charger
Flip-Open Battery Sled
Single 18650/20700/21700 Convertible

Size: 43.5mm x 28mm x 93mm
Temperature Limit: 200F – 600F
Output Power: 1 – 75 Watts
Power: 100W
Resin Color: Green Agate/Red Blaze
Frame Color: Dark Grey/Black

Urvapin’s Easter Sale is coming,10% off with coupon code: Easter,just cheack the link:

Strong Recommend:
Smoant S8 Pod Starter Kit
Wismec Luxotic NC Dual 20700 Kit
Vaporesso ORCA Solo Kit

Vandy Vape Pulse 80W BF Squonk Box Mod Review

Vandy Vape has announced that the Vandy Vape Pulse BF Squonk is no longer a mechanical squonk. We’ll almost, there is a newer regulated version with one of the best non-DNA chips on the market, the Vandy Vape Pulse BF 80W with Gene chip mod.

It’s exciting. It’s regulated. It’s a squonk box. Its the highly rated Vandy Vape BF Squonk Mod with a Gene Chip which is used in the popular Voopoo devices such as the Drag and the Alpha One.

Its named simply Vandy Vape Pulse 80W BF Squonk Box Mod with Gene Chip, well… not that simple but the clue is in the title in that it will only output up to 80W.

The battery choice includes a 20700 battery or with the included adaptor a 18650, but not a 21700 battery.

The Gene chip will allow the mod to have both Variable Wattage and Temperature Control modes, and boasts almost instant firing.

Panels are resin or carbon fiber and will be swappable like the original Pulse BF Squonk. Sizing is different so you can’t use the original panels. As It’s bigger than the original, and according to Tony B, a 24mm diameter tank will fit without overhang.

There is also a re-design of the squonk bottle connection to help prevent our biggest gripe, squeezing the bottle as you remove/replace it into the mod and making a mess of your e-juice.

Specs & Features


Size: 54*25.9*82mm
Max Wattage: 80W
Connection Threading: 510

Vandy Vape Pulse BF Squonk Box Mod with Gene Chip comes with:

1 x Vandy Vape Pulse BF 80W Box Mod with Gene Chip
1 x 7ml Squonk Bottle
1 x QC USB Cable
1 x Instructional Manual
1 x 18650 Battery Adaptor
1 x 30ml Silicone Refilling Bottle

New Arrival:
Wismec Reuleaux RX Gen3 Dual Kit
Nikola Niagara Squonk 200w Kit
Vandyvape Pulse BF 80W Box Mod

SMOK Stick Prince Kit – A Legend

The SMOK Stick Prince Kit, regarded as a legend in the e-cigarette market, includes a powerful Stick Prince mod and TFV12 Prince tank. SMOK Stick Prince is powered by powerful built-in 3000mAh battery. The durable battery guarantees your long time vaping and provides massive cloud of vapor. The LED indicator around the power button on its body can tell you the battery life. The power button is newly designed and looks special. It feels good when you press it. Power bottom together with a carefully carved battery base shows you how elegant it is. Max output wattage is 100W. The mod features multiple protections: low voltage protection, 8 seconds Cut-off and short circuit protection. With wild appearance and special touch, the cobra drip tip will give you perfect experience! The top refill makes filling easy. Leaking will not occur, because there is leak proof slot. The 8ml large capacity and hyper engines of TFV12 Prince guarantee you huge vapor.

Parameters of SMOK Stick Prince
Size: 24.5mm(W) x 85mm(H)
Voltage Range: 3.4-4.2V
Power: 80W-100W
Battery Capacity: 3000mAh
Standby Current:< 200uA
Color: Gold / Rainbow/ Blue / Silver/ Black / Red / Purple / Green

Parameters of TFV12 PRINCE Tank
Size: 63mm(H) x 25mm(D)
Capacity: 8ml
Thread: 510
Material: Stainless steel and Pyrex glass

3000mAh large battery capacity
Special hexagon power button
Carefully carved battery base
Intelligent LED indicator
Multiple protections
Cobra drip tip
Adjustable bottom airflow
Top filling system
Patented Locking Mechanism

SMOK Stick Prince Kit comes with
1 * Stick Prince
1 * TFV12 Prince Tank
1 * V12 Prince-M4(0.17Ohm Quadruple Coils)(Pre-installed)
1 * V12 Prince-M4(0.17Ohm Quadruple Coils)
1 * USB Cable
1 * User Manual
Spare Parts

Do you want to try this legendary SMOK Stick Prince Kit? Buy it on Urvapin and you will get a discount.

E-cigarette Brand Recommend:
Kanger Vape
Steel Vape
Voopoo Vape
Sigelei Vape

Review Of Wismec CB-60 Kit

The Wismec CB-60 Box Mod is paired with Amor NS Tank which is a MTL (Mouth to Lung) Atomizer, that will provide you a great flavor satisfaction from your e-liquids. This Kit is ideal for Beginners who are new and trying to switch to Vaping. It is also intended to be a Tank for Nicotine Salts with a higher nicotine level without the harsh throat hit.
The Wismec CB-60 Box Mod has a dimension of 22.6mm x 36.9mm x 75.9mm. This is a very portable vaping device to use that is perfect on-the-go, it can fit perfectly with no hassle in your pocket.

I really like how Wismec Company designed the exterior Metal plate that is angled, adding a good overall aesthetics, simple but powerful. A curve design on the other side for a more comfortable grip. Firing Button location is also a big plus for me, it is good or I must say perfect for a thumb press firing.

First of all The Wismec CB-60 Kit is created for Beginners and for Nicotine Salt E-Liquid with high nicotine contents, this is not a Cloud chasing set-up. The Amor NS Tank is intended to be a MTL (Mouth to Lung) Vaping, meaning the vapor you will get is somehow similar to the level of smoking. 10 – 13 watts is enough for a great flavor experience for MTL. Tip: Don’t go higher than 13 watts with Amor NS Tank.

On the other side, you can also use the Wismec Box Mod to pair with other different atomizers, it can still provide you a good performance because of its maximum output of 60 watts, that can fire-up a simple Sub-Ohm coil resistance builds.

Like I said the Wismec CB-60 Kit is a perfect Vaping Device for Beginners. It doesn’t have any complicated system setting that you need to worry about, simple interface for a simple device. The Amor NS Tank which is advertised by Wismec for High Nicotine e-liquids. It gives a really good flavor, and take note higher nicotine level with this tank doesn’t have that strong nicotine throat hit that you will mostly experience on a Sub-Ohm Vaping Device.

Overall experience is great. I am a big fan of Wismec in terms of the materials they are using for their products, those brushed finish metals looks and feels really good, you can choose from 5 different color option at Urvapin, I will highly suggest getting the Bronze Color option .

E-cigarette Brand Recommend:
OBS Vape
Vaporesso Vape
Ijoy Vape

Eleaf iStick Kiya 50W Kit Review

This is a preview for the latest to come from popular manufacturer Eleaf. Here is the Eleaf iStick Kiya 50w Kit a 50w Kit. Paired with the GS Juni Tank. Expect a full review of this in due course but these are my initial observations. Eleaf as we have come to know release great products to suit all budgets. This is no exception, pricing is very competitive with no apparent reduction in quality.
Eleaf iStick Kiya 50W Kit
The Eleaf iStick Kiya

First we take a look at the Kiya 50w Mod. The first thing you will notice is its super compact size. Measuring in at 57 x 35 x 25mm this is going to be one nice fit in your hands. I would expect this to be pretty lightweight to compliment the small size. Powered by an internal 1600mah battery this will give you respectable battery life considering it is a 50w mod. This mid range in power should help with the battery longevity. Its notable to note that the Kiya Kit supports 2a fast charging. The Kiya boasts various operating modes including TC / VW / Bypass / Preheat & TCR. Thats enough modes for menu fiddlers like me ! The display is a front hogging size, dominating most of the front of the Kiya measuring 1.45 inches. This is more than enough space to show all the important information you would expect. Menu system looks well designed and displays clearly and simply on the display. Finally I love the look of the fire button this is pretty much the same size as one of the sides.

Colour options are White with Green ( Which I love ) Black and finally Silver.

The GS Juni Tank

Complementing the Eleaf iStick Kiya you will also find in the box the GS Juni tank. This is a 2ml tank meaning it is TPD compliant for customers within the UK. Coil options included are a 0.75ohm and a 1.5ohm coil. As a starter kit for someone these are two great options. Going forward there are other coil options available as the Juni is compatible with the GS Air coils this allows a few other coil options including a 0.15ohm TC coil. Airflow is solely from the bottom and is fully adjustable. Given this is with the Kiya mod I would expect that this will also be a compact tank.

Eleaf iStick Kiya 50W Kit
Initial Final Thoughts

I am pretty excited to have the chance to review this. A compact mod is always a bonus for me for carrying to work and just having a vape on my breaks. Initially I thought this may be a perfect entry kit only given the included coil options but the compatibilty with the GS Air coils opens up viable options for me to consider this to be a daily carry. Compact in size and priced well this looks to be a good choice for customers to buy. Does size matter in this case ?

Strong Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Stick X8 Kit

Vandy Vape PULSE Squonk BF BOX MOD Review

The Vandy Vape Pulse BF is the first squonk box mod by Vandy Vape. The device features a locking power safety switch, a spring-loaded 510 connector, an 8ml silicone bottle, replaceable panels, compatibility with both 18650 & 20700 batteries and is very affordable.

This box mod measures 77mm x 50mm x 27mm, is made from nylon & heat resistant ABS and is available in black, red, cyan and grey. What’s great is that the front and back panels are replaceable and can be purchased in other colors such as white, blue and purple. The plates are held in place by five powerful magnets which allows for easy removal and effortless access to both the battery and bottle. The unit can be powered by either a 20700 or 18650 battery with an adapter. The e-liquid bottle that directs juice to the atomizer can hold up to a massive 8ml of e-juice, is also easy to squeeze and is made from food grade material for health.

The technical features of the Vandy Vape Pulse BF are an intelligent fire button that allows for for a constant electrical current of 30A (constant) and up to 40A (pulse). A unique safety feature is a locking power switch that prevents accidental firing for safety. Copper contacts direct connect from power switch to the 510 to ensure best electrical conduction.

Vandy Vape PULSE Squonk BF BOX MOD
Pulse BF Features & Specs.
Affordable squonk box mod
Constructed from nylon with temperature resistant ABS
Measurements: 77mm x 50mm x 27mm
Weight: 170g
Detachable structure
Colors: grey, cyan, red, black
Spring-loaded 510 connection
Replaceable panels
Held down by magnets
Available in white, blue, purple
Easy access to bottle and battery
Compatible with 20700 or 18650 battery
Intelligent fire button
Max pulse current: 40A
Max constant current: 30A
Locking power safety switch
Stops accidental firing
8ml juice bottle
Easy to squeeze
Made from food-grade silicone
Copper contacts for optimal electrical conductivity

Get Vandy Vape Pulse BF Squonk Box Mod Clik here ==> Vandy Vape Pulse BF Squonk Box Mod

Best Recommend:
купить электронную сигарету онлайн
vape wholesale
smok priv one kit

Smoant Charon TS 218W touch screen mod

Smoant Charon TS 218W Box Mod, a pocket device deploys a beautiful highly-responsive screen with custom VW/TC curves and a genuinely clean to use interface and a tiny display screen lock button above the fire key to ensure a safe way for operation.
Powered via two 18650 batteries whose most output can be reached to 218W with quick and strong power transport in addition to wonderful TC. It has a user-friendly UI to pair with the advanced chipset from the original Charon 218W. The touch screen mod features a massive 2.4 inch TFT touch screen to improve the operation to an easy and effective level.
The Charon integrates an updated ANT 218s chipset capable of firing up to 218W and comprehensive temperature control regulation with support for Ni200 Nickel, Titanium, and Stainless Steel heating element, providing a stable performance for vapers to enjoy. The Smoant Charon TS 218W also features low resistance protection, over-time charging protection, overheating protection and reverse polarity protection. These design will bring you a pleasant and safe vaping experience!

Smoant Charon TS 218W
Features & Specifications
Dimensions: 59.5mm x 85mm x 29.3mm
Compact, portable, ergonomic
Power output range: 1W to 218W
TC output range: 100 to 300℃ or 200 to 600℉
TC mode compatibility: SS, Ni200, Ti, TCR, TC Curve
Resistance range VW: 0.1Ω to 5.0Ω
Resistance range TC: 0.05Ω to 2.0Ω
Power heating modes: Min, Norm, Hard, Max, Power Curve
Massive touch screen display :
Size: 2.4″
Glitch free
Easy lock/unlock button to prevent accidental firing, unnecessary battery draining & unwanted mod adjustments
Brightness adjustment

Utilizes dual 18650 cells:
Magnetic back battery cover
Micro USB 5V/1A charging
Passthrough vaping system
Vape while charging

Safety features:
Low resistance protection
Reverse battery protection
Overheat protection
Over-puff protection
Temperature protection
Low voltage protection

Included with purchase:
1 * Smoant Charon TS 218W TC Mod
1 * Micro USB Cable
1 * User Manual

Smoant Charon TS 218W is one of the best touch screen mod on the market today with a futuristic design. To join the touch screen trend, you can get it on Urvapin.

Best Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
SMOK Stick X8 Kit

A robust device – Geekvape Aegis 100W TC Box Mod

A sensational device crafted with modern chassis designs and comprehensive output functionalities, the Geekvape Aegis 100W TC Box Mod reigns as one of the best single 18650/26650 output devices in the market. It is supposed to feature a waterproof, shockproof and dust-proof design, accomplished by adopting advanced LSR Injection Moulding technology.

Geekvape Aegis

The Geekvape Aegis MOD is supposed to have adopted one of the most advanced chipsets with “real rated power”, 0.015s instantaneous firing and 7 multiple protection systems. The Aegis supports a maximum 100W output power with a single 26650 battery cell or 18650 cell. The Geekvape Aegis has a compact size, is compatible with almost all atomizers, and it’s built to last forever.

The Geekvape Aegis is said to be one of the most robust vape mods made today (MIL STD 810G-516.6 military grade shockproof), with no apparent need to worry about getting scratched, soiled or broken through accidents. It is waterproof, friendly for beach, fishing, swimming, boating, kayaking, and water park activities. It is dust-proof, able to withstand dirty environment and can be easily cleaned.

Geekvape Aegis
Features & Spec:
Dimensions: 88mm by 46.8mm by 37.8mm
510 Connection
Colors: black, silver, yellow, gunmetal
Single 26650 High-Amp Battery – Not Included
Optional 18650 High-Amp Battery w/ Sleeve Adapter
Max Wattage Output: 100W
Temperature Control Range: 200-600F
Minimum Atomizer Resistance: 0.05ohm
Support Nickel, Titanium, and Stainless Steel Heating Elements
Temperature Coefficient of Resistance Adjustments (TCR)
VPC Mode – Power Curve Adjustments
Intuitive 0.91 Inch OLED Display
Durable Aluminum & Zinc Alloy Construction
LSR Injection Molding Technology – High-Resistant
Rocker-Style Firing Button
Threaded Battery Cap – Bottom-Loaded
Geekvape Aegis is pioneering the vape industry with something new. If you have interests, please go on Urvapin to get one.

Best Recommend:
electronic cigarette
vaporesso swag kit
Hangsen Genesis
tesla terminator

Sigelei Compak F1 40W Kit 2000mAh

The Sigelei Compak F1 Kit, the latest starter kit from Sigelei is a compact device that brings together tough, durable zinc alloy materials and a 2000 mAh battery so you can achieve high performance vaping with lower wattage output.
The Sigelei Compak F1 Kit features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and a integrated battery with fast micro USB charging. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.
This Sigelei Compak F1 Kit is perfectly pocket-sized and an excellent addition to the low powered vaping category.

sigelei compak f1 kit

Elegant design with different color options
Large firing button
Small durable shape with a comfortable feel
Rubber-oil material creates an ideal feel in your hand
Easy to view liquid through the 2 side windows
The atomizer can be easily removed which is very convenient and durable
The dust cap is stored under the device as a hygienic and clean tool

Material:Zinc alloy
Wattage range:25W-40W
Working mode: Power mode
Battery capacity: 2000mAh(internal battery)
Resistance: 0.3Ω
Tank capacity:2.0ml
Charging support(USB):5V/2A

Package Included
1 * Compak F1 Mod
1 * Tank
1 * Replacement coil
1 * USB cable
1 * User manual
1 * Warranty card

This Urvapin. You can preorder one.

Best Recommend:
buy electronic cigarette online
ijoy Genie PD270
vapemen steam engine
justfog p16a