Joyetech Ultex T80 with NCFilm heating Review

The Joyetech Ultex T80 is a tubular vape mod with a cool futuristic design and packed full of interesting features that we usually see on box mods. But what really sets it apart from all the other similar vape kits on the market – of which there are many – is the Cubis Max tank. It’s got top airflow to minimize leaking, holds up to 5ml of e-liquid, and most importantly, it does away with coil-heads, relying instead on an innovative heating element that can allegedly be cleaned and re-used for months.

A Look at the Contents

The joytech Ultex T80 kit comes in a large rectangular cardboard box with the assembled tubular mod and sub-ohm tank on the front, and a list of contents, company information and a scratch and check authenticity seal on the back.

Joyetech Ultex T80

Inside the box, we have the single 18650 battery tube mod sitting next to the Cubis Max tank, a spare glass section and a smaller box that contains the micro-USB charging cable and two small bags of accessories (cotton sheets, spare o-rings for the tank, a spare NFC heating element, and a small screwdriver). At the bottom of the box you’ll find separate user manuals for the mod and the tank as well as a battery warning card.

Design and Build Quality

Yeah, i have to say the Joyetech Ultex T80 looks very different compared to the vast majority of regulated tubular mods. Instead of a simple tube with an unimpressive tank slapped on top, you have this intricately designed piece of metal that, in my opinion, resembles the handle of a lightsaber, and a futuristic-looking tank. It’s really quite impressive for appears to be a rudimentary vape mod. But appearances can be deceiving, as there is much more to the T80 that meets the eye.

Joyetech Ultex T80

The mod is made of zinc alloy and has a comfortable weight to it with a battery inserted, and the tank is made of stainless steel and glass.

From the bottom of the battery tube to the Delrin drip, the Joyetech Ultex T80 measures 138.5mm and has a diameter of 28mm. But that’s around its widest point, so don’t assume that you can get away with a 28mm atomizer without any overhang. The Cubis Max tank is also 28mm around its glass section, but it’s actually only 26mm at the base in order to align perfectly with the tank. So any tank or RDA with a base larger than 26mm will overhang.

It’s hard for me to describe the general look of this mod, but I think the word futuristic pretty much sums it up. So if you’re into SciFi, alien artefacts, and stuff like that, I think you’ll find it very attractive. I personally like the overall design and I think Joyetech deserves a thumbs up for trying something different.

Joyetech Ultex T80

Starting at the top, the Joyetech Ultex T80 mod features a classic 510 connection with a gold-plated, spring-loaded 510 pin. The fire button is located close the top of the mod, opposite the micro-USB charging cable. Instead of the classic round fire button, Joyetech decided to go with an elongated rectangular design that fits the general design of the mod very well. The button protrudes from the mod quite a bit, is very clicky and doesn’t have any rattle.

The ‘+’ and ‘-‘ buttons are located between the fire button and the small display near the bottom. They are not marked but it doesn’t take a genius to figure out which is which, since they are positioned one above the other. Unlike the fire button, which doesn’t rattle at all, these adjustment buttons are very loose and do rattle if you shake the mod. However, I didn’t find them annoying at all during day to day use.

Joyetech Ultex T80

The Joyetech Ultex T80 is one of the few modern tube mods that features an integrated display. It reminds me of the early regulated tube mods, like the Provari 2.5. It’s a small, black and white screen with an unimpressive resolution compared to the gorgeous screens we’ve seen on box mods like the Modefined Draco or Smoant Naboo, but it’s a nice feature nonetheless.

Finally, at the bottom of the mod, we have the battery cap, which unscrews to reveal the single 18650 battery compartment. The bay itself is a bit tight. Batteries with original wrapping fit snug, but rewrapped batteries tend to get stuck inside because there’s no wiggle room at all. That’s a pro and a con, depending on how you look at it.

Joyetech Ultex T80

Menu System and Navigation

Most of the regulated tubular mods I’ve reviewed lately, like the SMOK Stick Prince or the Eleaf iJust 3 didn’t even have a menu. They ere rudimentary vaping devices that pulled power straight from the battery, so all you had to to was screw on an atomizer and push the fire button. Well, the Ultex T80 is different. Not only does it have variable wattage technology, but it also has most of the features we see on advanced mods, like temperature control, TCR and preheat settings. To be honest, I really didn’t expect it to be this complex.

To get into the modes menu, all you have to do is press the fire button three times. You will then be able to browse through all the available modes – wattage mode, temperature mode for three supported materials (stainless steel, titanium and nickel), three TCR memory modes and even Bypass, which lets you pull power straight from the battery, but with all the built-in protections still active.

Joyetech Ultex T80

But the Ultex T80 actually has a secondary menu you can access. Hold the fire button and the ‘+’ button pressed simultaneously for two seconds, and you will be taken to the settings menu, where you can, select which secondary parameter appears on the main screen (voltage, amperage or puffs) enable and disable Stealth mode (turn off the display), select the duration and intensity of the preheat, check the version of the firmware and, finally, check the voltage of the battery.

Apart from custom curves mode, and other bells and whistles that you don’t really need, this thing has all the main features you’ll find on the latest advanced mods, which is pretty darn impressive.

Joyetech Ultex T80

Navigation is pretty straightforward, as all you have to know is that the ‘+’ and ‘-‘ buttons are used to browse through various submenus and options, and pressing the fire button confirms your choices.

The Tank

While the Joyetech Ultex T80 is pretty cool for a regulated tube mod, it pales in comparison to the Cubis Max tank, which is a bit unusual, as in most other similar kits, you get a run of the mill tank that works ok but doesn’t really blow you away. But as I said before, this kit is different.

Like the original Joyetech Cubis tank, the Cubis Max features top airflow to minimize leaking. It has an e-liquid capacity of up to 5ml, and can be refilled through the top fill port, by sliding the top cap outwards. Just look for the red arrow on the top cap and push against it with your thumb to reveal the fill slot.

Joyetech Ultex T80

The airflow channel on this tank is very interesting. basically that chimney going through the middle of the tank has air and vapor going in opposite directions. There is an outer channel through which the air travels from the top airflow slots down to the heating element at the bottom and then goes into the inner channel and reaches the user’s mouth. The design is similar to the OBS Engine RTA, only here you can actually see both channels when you disassemble the tank.

But what really sets the Cubis Max apart from any of the tanks I’ve ever used is the fact that it doesn’t need coil-heads. Instead it uses a replaceable heating element called NCFilm heater, which I am pretty sure stands for “Notch Coil Film”, as this heater looks very similar to Joyetech’s innovative notch coil.

Joyetech Ultex T80

So how does this NCFilm work? Well, it’s actually quite an interesting design. The heater is screwed to the inside of the tank and on the tank base you have a square sheet of cotton pressed against it. When the battery is activated, the NCFilm element, which is made of Kanthal, heats up and vaporizes the e-liquid absorbed by the piece of cotton. The juice flows into this unconventional wicking through two slots located on either side of the heating elements, so you never have to worry about the cotton drying up as long as there’s e-liquid left in the tank. Thank you, gravity!

The Cubis Max is designed in such a way that you can check the cotton wicking and even replace it without having to drain the tank, which is a big plus. All you have to do is unscrew the outer ring around the base of the tank, hold the atomizer upside down and then grab the connection pin and pull the base off. Then you can adjust or replace the sheet of cotton, put the base back on and keep on vaping.

Joyetech Ultex T80

The biggest advantage of this innovative NCFilm is that you can actually clean it and reuse it for several months. That doesn’t work with most coil-heads. Once gunk builds up around the heating element and on the wicking, all you can do is throw it away, but with this heating element, you can just dry burn the juice deposits, change the wicking and you’re good to go. Joyetech claims that you can use an NCFilm for up to three months before replacing it, but I guess you can use it even longer than that if you’re vaping a clear, unsweetened e-juice.

And since the Ultex T80 kit includes a spare NCFilm heater, you’re good to go for at least six months, which is a huge pro in terms of maintenance consts. To replace, just use the included screwdriver to take out the two tiny screws keeping the heating elements in place, put the new one back on, and you’re good to go.

Joyetech Ultex T80

Battery Life and Performance

As I mentioned, the Joyetech Ultex T80 is powered by a single 18650 battery (not included). Battery life depends on a variety of factors, like the capacity of your battery, the set power output and how much you’re using the device. If you’re going to crank up the power to maximum (80W), that battery won’t last you more than a couple of hours, maybe three, but at a reasonable power level (40W – 50W), you’re probably going to get around 6 hours of battery life. That’s been my average range anyway.

The Ultex T80 features on-board charging, fast charging and vape-while-charging. The battery charging rate stated on the Joyetech website is 2A, and you will be able to use the device while it’s charging. That’s pretty good, but if you own an external battery charging, I recommend you use that instead whenever possible. It’s safer, and it’s better for the battery.

Joyetech Ultex T80

In terms of performance, I haven’t had any issues with the mod whatsoever. I don’t know what chip Joyetech has used this time around, but this device fires extremely fast, and so far I have yet to encounter any errors. It works as intended is what I’m trying to say.

The tank is about the same, although there are a few things I would like to point out. The NCFilm may have the huge upside that it can be used for a long time and thus save you money, but it also tends to shoot droplets of hot e-liquid into your mind every once in a while. It’s not nearly as bad as the original Cubis and it’s BF coil-heads, but it does happen occasionally so I have to mention it. However, the droplets rarely make it all the way to your mouth, and they’re really small so you barely feel them.

Joyetech Ultex T80

Another thing I have to mention is the mediocre flavor. It’s not bad, but it’s definitely not the best I’ve ever gotten out of a tank either. As far as I can tell, it has nothing to do with the wicking not being completely saturated – Joyetech’s system actually guarantees perfect saturation – but rather with the way the airflow is designed. You see, the air coming through the outer chamber of the chimney only hits the top of the NCFilm heater and then goes straight through the inner chamber, and that’s not ideal in my book. The airflow doesn’t even hit the heating element directly, not to mention coming in from underneath it to push all the flavorful vapor into the chimney, but rather travels above it before shooting back up.

Overall, the NCFilm heater is a very interesting innovation, I just think it needs a bit of work to perfect. I for one can’t wait to see what Joyetech does with it going forward, because the premise of a reusable coil for casual users is definitely going to appeal to a lot of people.

Joyetech Ultex T80

Conclusion

The Joyetech Ultex T80 surprised the heck out of me. The mod itself is way more advanced than I expected, featuring most of the modes and settings we usually see on high-end box mods, and the NCFilm really made the Cubis Max tank the star of this kit. The fact that you can clean it and use it for months is a potential game changer, and the performance was promising as well.

Whether you’re looking for a tubular mod that’s packed full of features or just want to see what the new NCFilm heating element is all about, I recommend giving the Ultex T80 a try, it’ll surprise you.

Rating

  • Build Quality   ★★★☆☆
  • Performance ★★★☆☆
  • Ease of Use ★★★☆☆
  • Pricing ★★★☆☆

Product Detail: Joyetech ULTEX T80 80W TC Kit with Cubis Max Atomizer

Recommended product:
Tesla Punk 86w Mech Mod
iJoy Shogun Univ Mod
Smoant Karat Pod kit
Coilart mage mech V2.0
Nikola Wolverine 230w Box Mod

More Article:
Freemax Twister Kit Preview – With Fireluke 2 Multi Mesh Tank!
Ijoy Dimond VPC Kit Review | I think it’s around here somewhere?
Hotcig G100. First look

Lost Vape Mirage DNA75C Mod Review

Lost Vape has been delivering some of the very best mods integrating the Evolv DNA chip for some time, and the Mirage looks like another exceptionally designed box.

The Lost Vape Mirage DNA75C Mod is a box mod designed to be compatible with a single high drain 18650, 20700 and 21700 (converter included) battery and can fire up to 100W Max using the latter two. Its manufactured with rounded ends with a colourful resin finish at the rear and also rumors of a wood body material replacing the resin soon.

The Mirage features the Evolv DNA75 Color chip inside which incorporates a power regulated digital switch-mode and Evolv’s patented Wattage Control, Temperature Protection, Preheat, a full-color TFT screen, Reverse Polarity Protection, an onboard programmable multicolor LED, waterproof buttons and a real-time clock.

Specs & Features

Specs:

Evolv DNA75C Board with upgradable firmware
Theme Designer Software/Customizable User Interface
Onboard Programmable Multicolor LED
Stainless Steel 510 Atomizer Connector
Anodized Aluminum Frame and Top
Boost/Preheat 100 Watts Power
Integrated 1Amp On-board Balanced Charger
Flip-Open Battery Sled
Single 18650/20700/21700 Convertible

Size: 43.5mm x 28mm x 93mm
Temperature Limit: 200F – 600F
Output Power: 1 – 75 Watts
Power: 100W
Resin Color: Green Agate/Red Blaze
Frame Color: Dark Grey/Black

Urvapin’s Easter Sale is coming,10% off with coupon code: Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Wismec Luxotic NC Dual 20700 Kit
Vaporesso ORCA Solo Kit

SMOK Stick Prince Kit – A Legend

The SMOK Stick Prince Kit, regarded as a legend in the e-cigarette market, includes a powerful Stick Prince mod and TFV12 Prince tank. SMOK Stick Prince is powered by powerful built-in 3000mAh battery. The durable battery guarantees your long time vaping and provides massive cloud of vapor. The LED indicator around the power button on its body can tell you the battery life. The power button is newly designed and looks special. It feels good when you press it. Power bottom together with a carefully carved battery base shows you how elegant it is. Max output wattage is 100W. The mod features multiple protections: low voltage protection, 8 seconds Cut-off and short circuit protection. With wild appearance and special touch, the cobra drip tip will give you perfect experience! The top refill makes filling easy. Leaking will not occur, because there is leak proof slot. The 8ml large capacity and hyper engines of TFV12 Prince guarantee you huge vapor.

Parameters of SMOK Stick Prince
Size: 24.5mm(W) x 85mm(H)
Voltage Range: 3.4-4.2V
Power: 80W-100W
Battery Capacity: 3000mAh
Standby Current:< 200uA
Color: Gold / Rainbow/ Blue / Silver/ Black / Red / Purple / Green

Parameters of TFV12 PRINCE Tank
Size: 63mm(H) x 25mm(D)
Capacity: 8ml
Thread: 510
Material: Stainless steel and Pyrex glass

Features:
3000mAh large battery capacity
Special hexagon power button
Carefully carved battery base
Intelligent LED indicator
Multiple protections
Cobra drip tip
Adjustable bottom airflow
Top filling system
Patented Locking Mechanism

SMOK Stick Prince Kit comes with
1 * Stick Prince
1 * TFV12 Prince Tank
1 * V12 Prince-M4(0.17Ohm Quadruple Coils)(Pre-installed)
1 * V12 Prince-M4(0.17Ohm Quadruple Coils)
1 * USB Cable
1 * User Manual
Spare Parts

Do you want to try this legendary SMOK Stick Prince Kit? Buy it on Urvapin and you will get a discount.

E-cigarette Brand Recommend:
Kanger Vape
Steel Vape
Voopoo Vape
Sigelei Vape

Wismec Reuleaux RX2 20700 Kit Review

I’m sure no other vaping device has seen as many iterations as Wismec’s Reuleaux series. I can’t even count how many there have been! Nevertheless, Wismec has decided to release another, hot on the heels of the Gen 3 comes the Reuleaux RX2 20700.

You may have guessed by the name what this device has to offer by the name; it is dual 20700 battery box.

Let’s look at how the new Reuleaux stands up against its predecessors.

There really is only one fundamental difference between the Reuleaux RX2 and the GEN3, and that is the batteries. The RX 2 20700 gives you the option to use either dual 20700 or 18650 batteries. This means users can expect a max output power of 200-watts with a top output voltage of 9 V.

The original Reuleaux was a major hit, and it seems with the GEN3 that Wismec created another great device probably the smallest triple battery mod on the market today. But is the RX2 really necessary?

Well, it’s not a bad thing to have options, and I applaud Wismec for giving users plenty of options. There maybe be many vapers that haven’t invested in a GEN3, and this mod might just offer a great versatile option in the emerging 20700 category.

The Reuleaux RX2 comes with a large 1.3-inch OLED screen (just like the RX GEN3). The form and outer appearance is a relative affair, the only real differences being a slightly taller, but thinner chassis and a larger firing button.

It also comes paired with the GNOME Atomizer, in either 2 mL or 4 mL capacity. The GNOME is actually a surprisingly good tank as part of a kit, with the WM coil heads providing excellent vapor and flavor.

Although there isn’t any substantial new technology to get excited about here, and it wouldn’t be worth trading your GEN3 in for. The Reuleaux RX2 20700 looks to be a versatile dual battery kit that comes from an excellent pedigree and will unquestionably suit plenty of vapers.

Wismec Reuleaux RX2 20700 Kit Specs and Features

Specs:

Size(Mod): 43.2*35.2*81.7 mm
Height(atomizer): 45 mm
Diameter(atomizer): 25 mm
E-liquid Capacity: 2 / 4 mL
Thread Type: 510 spring loaded connector
Output Mode: VW /TC-Ni / TC-Ti / TCSS / TCR mode
Output Wattage: 1 – 200 W
Cell Type: high-rate 20700 cell (discharging current should be above 25 A)
High-rate 18650 cell with the help of battery sleeve (discharging current should be above 25 A)
Resistance Range: 0.05 – 1.5 Ohm for TC modes & 0.1-3.5 Ohm for VW mode
Temperature Range: 100 – 315°C / 200 – 600°F (TC modes)
Maximum Charging Current: 2 A
Maximum Output Current: 50 A
Output Voltage Range: 0.5 – 9 V

Kit Contents:

1 x Reuleaux RX2 20700 mod (no cells)
1 x GNOME
1 x WM02 Dual 0.15 Ohm Head
1 x WM03 Triple 0.2 Ohm Head
1 x QC USB Cable
2 x User Manual
2 x Warning Card
Spare parts

Best Recommend:
купить электронную сигарету онлайн
vape wholesale
iJoy CAPO SQUONK KIT
Laisimo Spider MOD

Joyetech Exceed Box Kit review

Today We will tell about the next recruitment for beginners from the company Joyetech called Exceed Box.

The Chinese from Joyetech definitely know a lot about starting sets. Moreover, this feature has been noticed for the company since the days of one of the first “Eyeshek”. Recently on the pages of our site flashed a review on the Exceed D19 Kit – a modernized device of the old diameter of 19mm, which received quite good reviews on the Internet. A few days ago the manufacturer continued the line of devices with the name Exceed and presented already a box mod, staffed with an interesting cleric. Let’s take a look at all this joy.

Joyetech Exceed Box Kit is a next “whale” for beginners vapers, brought to almost maximum ease of use. The novelty is available for purchase in five basic colors. Interestingly, the complete tank will have a similar color box in all cases.

The battery pack received a built-in 3000 mAh battery with the ability to charge up to 1A. Exceed Box can work in two modes: constant voltage and the principle of mehmoda. Switching between these modes occurs when the Fire button is pressed three times.

The control function of the device is assigned to a tiny LED-display of circular shape. Can this screen, by the way, not so much: to display the level of charge of the built-in battery and to inform about the switching of the modes of soaring. A little lower you can see a strip with a highlight around the fashion, performing similar actions to the display.

The “whale” tank was called EXCEED D22C and it is quite a standard non-service, however, with some of its features, which include, for example, the modern possibility to change the capacity from 2ml to 3.5ml.

Joyetech focuses on the new filling system, developed with special protection from children. To open the lid, you will need to press and rotate it. It is unlikely that such a construct will cause difficulties for anyone, but the manufacturer at least tries.

By and large, the tank is not something unique, but, coupled with the MTL-evaporator, can become a good alternative for fans of tight tightening, who do not want to bother with winding.
Joyetech Exceed 3000mAh Box Kit
Specifications Joyetech Exceed Box Kit:

Dimensions: 25mm * 41mm * 115mm
Weight: 145.8g
Capacity of the tank: 2ml / 3.5ml
Battery capacity: 3000mAh
Maximum charging current: 1A
Colors: silver, black, white, dark orange, black & white

Related Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Mag kit

Eleaf iStick Kiya 50W Kit Review

This is a preview for the latest to come from popular manufacturer Eleaf. Here is the Eleaf iStick Kiya 50w Kit a 50w Kit. Paired with the GS Juni Tank. Expect a full review of this in due course but these are my initial observations. Eleaf as we have come to know release great products to suit all budgets. This is no exception, pricing is very competitive with no apparent reduction in quality.
Eleaf iStick Kiya 50W Kit
The Eleaf iStick Kiya

First we take a look at the Kiya 50w Mod. The first thing you will notice is its super compact size. Measuring in at 57 x 35 x 25mm this is going to be one nice fit in your hands. I would expect this to be pretty lightweight to compliment the small size. Powered by an internal 1600mah battery this will give you respectable battery life considering it is a 50w mod. This mid range in power should help with the battery longevity. Its notable to note that the Kiya Kit supports 2a fast charging. The Kiya boasts various operating modes including TC / VW / Bypass / Preheat & TCR. Thats enough modes for menu fiddlers like me ! The display is a front hogging size, dominating most of the front of the Kiya measuring 1.45 inches. This is more than enough space to show all the important information you would expect. Menu system looks well designed and displays clearly and simply on the display. Finally I love the look of the fire button this is pretty much the same size as one of the sides.

Colour options are White with Green ( Which I love ) Black and finally Silver.

The GS Juni Tank

Complementing the Eleaf iStick Kiya you will also find in the box the GS Juni tank. This is a 2ml tank meaning it is TPD compliant for customers within the UK. Coil options included are a 0.75ohm and a 1.5ohm coil. As a starter kit for someone these are two great options. Going forward there are other coil options available as the Juni is compatible with the GS Air coils this allows a few other coil options including a 0.15ohm TC coil. Airflow is solely from the bottom and is fully adjustable. Given this is with the Kiya mod I would expect that this will also be a compact tank.

Eleaf iStick Kiya 50W Kit
Initial Final Thoughts

I am pretty excited to have the chance to review this. A compact mod is always a bonus for me for carrying to work and just having a vape on my breaks. Initially I thought this may be a perfect entry kit only given the included coil options but the compatibilty with the GS Air coils opens up viable options for me to consider this to be a daily carry. Compact in size and priced well this looks to be a good choice for customers to buy. Does size matter in this case ?

Strong Recommend:
buy electronic cigarette online
smok priv v8 kit
iJoy Elite PS2170 kit
SMOK Stick X8 Kit

SMOK TFV8 Big Baby LED Light Edition 5ml tank Preview

SMOK continues to create some of the best Sub-Ohm tank for the vaping community. Performance on varied devices has changed the way people consume eliquid, and has brought sub-ohm vaping into the mainstream… a long time ago. With the upcoming release of the SMOK TFV8 BIG BABY LIGHT EDITION TANK, SMOK continues to forge ahead. Offering a full 5mL juice capacity, and high-wattage coil choices, this is no lo-fi sub-ohm tank.
SMOK TFV8 Big Baby LED Light Edition 5ml tank

So, what do we know about the TFV8 Big Baby Light Edition?
In the addition to the 5mL capacity, the SMOK TFV8 Big Baby Light Edition Tank, is said to be another remarkable sub-ohm that will deliver the same incredible cloud and flavor performance as the original TFV8 Big Baby Beast. With a new aesthetic that is sure to cause Vapers to look more closely to the attractiveness of their tank, it promises to look great on our favorite mods, all while maintaining the SMOK TFV8 performance.

The SMOK TFV8 Big Baby Light Edition is made with the same fine materials, it’s chassis, structure, and body of this new tank is fabricated with 304-grade stainless steel. The combination of nickel, steel, chromium, and manganese alloy provide for a tank that is durable, strong, and resistant to corrosion. The materials used ensure that the Big Baby Light Tank will be capable of withstanding the rigors of heavy use, even at high wattage and temperatures.

The TFV8 Big Baby Light Edition Tank uses a 100% pure borosilicate glass. The Big Baby Light Tank’s glass reservoir, is impervious to the acidic juices, and will deliver a cleaner, purer flavor from ANY e-juice.

What Makes the Big Baby Light Tank Special?
The SMOK TFV8 Big Baby Light Edition special and distinct from the other SMOK tanks in the SMOK collection is an LED light located at the base of the tank. When the user fires the mod he or she will enjoy a cool and elegant LED light shining up into the tank, which glows the color of the particular O-ring in being used in the tank.

Change the illuminated shining light by swapping the O-ring seals, should the user ever want to display a different color. This light might sound specious, but it will help users monitor the remaining e-juice while vaping in a dark room, or outside at night.

The SMOK TFV8 Big Baby Light Edition features the dual-adjustable airflow control slots at the base of the tank. The TFV8 Big Baby Light Edition Tank also features the same advanced, and award-winning top-fill e-juice fill system. The Big Baby Light’s top cap is attached by a hinge, and swings open and shut with little effort.

SMOK TFV8 Big Baby LED Light Edition 5ml tank

SMOK TFV8 Big Baby LED Light Edition 5ml tank Features and Specs:
Capacity: 5ml
Height: 56mm
Diameter: 24.5mm
Material: Stainless Steel
Thread: 510
Output Voltage: >=1.5V

SMOK TFV8 Big Baby LED Light Edition 5ml tank Package Includes:
1 * TFV8 Big Baby Light Edition
1 * V8 Baby-Q2 Core(0.4Ohm Dual Coils)(Pre-Installed)
1 * V9 Baby-T8 Core(0.15Ohm Octuple Coils)
1 * V8 Baby-X4 Core(0.15Ohm Quadruple Coils)
1 * Replacement Glass Tube
1 * 510 Drip Tip Adapter
1 * User Manual
Spare Parts

E-cigarette Brand Recommend:
Smok Vape
Eleaf Vape
Joyetech Vape
Wismec Vape

How About Wismec SINUOUS FJ 200 Kit ?

Today we are talking about a novelty from the company Wismec and the already familiar designer Sinuous – a set of a cliromiser and box mod called Sinuous FJ200 Kit.

As we know, the first fruit of cooperation between the Chinese company Wismec and the designer with the pseudonym Sinuous was the Predator 228. The device turned out to be quite good, although it did not bring any fresh ideas to the wapping industry. However, because of a rather large percentage of marriage and poor quality performance, “Predator” received a flurry of criticism from the users and did not have much popularity. Today we will look at such a continuation of Predator 228 from all the same manufacturer and all the same designer, however, already under a different name and with some other “chips”. Meet the Wismec Sinuous FJ200.

At first glance at the Wismec Sinuous FJ200 Kit, it is immediately clear who made the hand to create the boxman’s design. And I have to say, it is necessary to say, very weakly, since the appearance of the device almost completely repeats Predator 228, except for a couple of minor features. In other words, the company Wismec.

Wismec SINUOUS FJ 200 Kit
How outwardly and constructively to find here a lot of differences will not work. The basic controls of the Sinuous FJ200 look and are in the same places as the Predator. Do not do anything and the Fire button disguised as the sidebar. But what really has changed in our novelty today is the maximum output power (now it is 200 watts) and the batteries. The Sinuous FJ200 has a built-in 4600mAh battery that supports charging up to 2A. Wismec company claims about some innovative and safe charging system, preventing excessive heating of the battery.

The “whale” version of the boxman is completed with a new unattended tank from Wismec called DIVIDER.

DIVIDER also works on new evaporators, which have so far only two types, one of which is designed for a fairly modest soaring, and the second can already generate a decent amount of steam at a power of up to 120 watts.

An interesting feature of DIVIDER is the possibility of changing the volume of the liquid. This is realized thanks to a special spacer, the installation of which the useful capacity is simply superseded.

The tank was already equipped with a branded filling system from Wismec with a retractable top cover. The manufacturer did not forget and equip his device with a tightening ring with a rotating ring from below.

Returning to the boxy Wismec Sinuous FJ200 Kit, I would like to note the correct location of the connector. Atomizers will be wound strictly in the middle of the device and the maximum diameter that will fit here is 28 mm.

As already mentioned above, the Fire button in the Sinuous FJ200 is implemented in a similar way to the “Predator” image and is hidden. To press the button it will be enough just to squeeze the device in your hand. An additional chip can be called a light indication in the form of a separately output LED.

Wismec SINUOUS FJ 200 Kit
Technical specifications Wismec Sinuous FJ200:
Dimensions: 45mm * 29mm * 123.4mm
Weight: 264g
Capacity: 2ml / 4ml
Operating modes: VW / TC-Ni / TC-Ti / TC-SS / TCR
Output power: 1-200W
Voltage: 0.5 to 9V
Output current: up to 50A
Resistance range: 0.05Ω-1.5Ω (TC) /0.1Ω-3.5Ω (VW)
Temperature range: 100 ° C-315 ° C / 200 ° F-600 ° F
Charge up to 2A
Battery capacity: 4600mAh

Strong Recommend:
cheap vape deals
SMOANT Gaia
asvape michael mod
snowwolf vfeng

Smok ProColor 225W Starter kit is coming

The company Smok released Smok ProColor Kit. The set includes a new luminous box 225 Watt box and a TFV8 Big Baby tank. Atomizer can be taken either for 2 or 5 milliliters.

June 14, Smok company introduced the Smok ProColor Kit in the instagram. This kit, which includes the eponymous boxbox and the TFV8 Big Baby tank. Boxmod has a rectangular shape with a slight narrowing in the center. One of the sides is completely occupied by the button. On the front side there is a highlight, reminiscent of the contour of the coat of arms or shield. Inside – a color display and power adjustment buttons. Below them is a USB port for charging. At the bottom of the device is the battery cover.

The mod works on two 18650 batteries. Its maximum power is 225 watts. Also the device is capable of operating in the thermal control mode and TCR. Also, the manufacturer notes that through the settings menu you can change the color of the illumination of the mod. You can also change the color of the interface. The board provides all the necessary protection: from short circuit, overcharge and overheating.

The complete tank TFV8 Big Baby is available in two variations: 2 (according to TPD) or 5 milliliters. The “European” version works with the V8 Baby-Q2 EU vaporizers: they are wider than the standard evaporators of this series. Otherwise, these devices are identical. Refueling is carried out from above, and adjustment of a blowing – from below.

In addition to the kit, the kit includes two evaporators, a USB cable, a spare glass, a repair kit and instructions.

Smok ProColor 225W Starter kit Main characteristics:

The size of the fashion is 85 by 46 by 29.5 mm
Weight – 151 gr
Power supply – 2Х18650
Power – 6-225 watts
The operating resistance is 0.1-3 ohms (varivatt), 0.06-3 ohm (thermal control)
The volume of the tank is 2/5 ml
Height – 56 mm
Diameter – 24,5 mm
Colors – black, green, purple, blue, red, silver, rainbow.

Best Seller:
buy electronic cigarette online
IJOY CAPO 100 KIT
smok priv v8
vaporesso swag kit

Smoant Charon TS 218W touch screen mod

Smoant Charon TS 218W Box Mod, a pocket device deploys a beautiful highly-responsive screen with custom VW/TC curves and a genuinely clean to use interface and a tiny display screen lock button above the fire key to ensure a safe way for operation.
Powered via two 18650 batteries whose most output can be reached to 218W with quick and strong power transport in addition to wonderful TC. It has a user-friendly UI to pair with the advanced chipset from the original Charon 218W. The touch screen mod features a massive 2.4 inch TFT touch screen to improve the operation to an easy and effective level.
The Charon integrates an updated ANT 218s chipset capable of firing up to 218W and comprehensive temperature control regulation with support for Ni200 Nickel, Titanium, and Stainless Steel heating element, providing a stable performance for vapers to enjoy. The Smoant Charon TS 218W also features low resistance protection, over-time charging protection, overheating protection and reverse polarity protection. These design will bring you a pleasant and safe vaping experience!

Smoant Charon TS 218W
Features & Specifications
Dimensions: 59.5mm x 85mm x 29.3mm
Compact, portable, ergonomic
Power output range: 1W to 218W
TC output range: 100 to 300℃ or 200 to 600℉
TC mode compatibility: SS, Ni200, Ti, TCR, TC Curve
Resistance range VW: 0.1Ω to 5.0Ω
Resistance range TC: 0.05Ω to 2.0Ω
Power heating modes: Min, Norm, Hard, Max, Power Curve
Massive touch screen display :
Size: 2.4″
Responsive
Glitch free
Easy lock/unlock button to prevent accidental firing, unnecessary battery draining & unwanted mod adjustments
Brightness adjustment

Utilizes dual 18650 cells:
Magnetic back battery cover
Micro USB 5V/1A charging
Passthrough vaping system
Vape while charging

Safety features:
Low resistance protection
Reverse battery protection
Overheat protection
Over-puff protection
Temperature protection
Low voltage protection

Included with purchase:
1 * Smoant Charon TS 218W TC Mod
1 * Micro USB Cable
1 * User Manual

Smoant Charon TS 218W is one of the best touch screen mod on the market today with a futuristic design. To join the touch screen trend, you can get it on Urvapin.

Best Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
SMOK Stick X8 Kit